Diameter: Diameter: 5/16inch(8mm)
Length: 1 inch
Diameter of the hole: 4mm
HOW TO USE:
1. Hold the ferro rod close to the tinder at about a 45-degree angle. ?Dead grass or weeds, fine, dry wood shavings, twine pulled apart, dryer lint or cotton balls... all make good tinder.?
2. Place the scraper near the top of the rod (so it makes solid contact with the rod).
3. Pull the rod back (away from the tinder) with a slow and steady motion.
Many people will hold the ferro rod next to the tinder and rub the scraper toward the tinder. By pulling the rod back (instead of rubbing the scraper forward) you'll create a spark at the same place. But you'll do it without risking bumping the scraper into your pile of tinder and scattering it all over the place.
Because Ferro rods contain iron, they're often coated to prevent oxidation. You'll need to scrape away the coating to expose shiny metal before first use.
Fasten this fire starter toggle to your gear, clothing, shoelace, keychains, custom paracord creations.
This ferrocerium rod toggle not only cinch up your gear, they produce fire - whenever and wherever you need it.
Don't use bad quality Knife as striker. Otherwise it will not produce enough sparks due to insufficient hardness of blade
Diameter: 5/16inch(8mm). Length: 1 inch
Hole diameter: 4mm